780nm Polarization Maintaining Fiber Patchcord

Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.

980nm PM Fused fiber Coupler (1x2, 2x2)

RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

850nm PM Fused fiber Coupler (1x2, 2x2)

RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

PM Fiber Mirror

Ruik's fiber mirror is a passive device with compace size, which is disigned to reflect the light through original route.

808nm PM Fused fiber Coupler (1x2, 2x2)

RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

780nm PM Fused fiber Coupler (1x2, 2x2)

RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

3-port 1064nm 300mW Non-PM Circulator

The 1064nm Non-PM Fiber Circulator routes input signals from Port 1 to Port 2 and input Port 2 signals to Port 3 while blocking reflected light; The device has high isolation, low insertion loss, high extinction ratio and excellent environmental stability.

PM Faraday Rotator Mirror

Ruik's fiber mirror is a passive device with compace size, which is disigned to reflect the light through original route.

Optical Fiber Faraday Rotator

Ruik's fiber mirror is a passive device with compace size, which is disigned to reflect the light through original route.

1550nm 500mW Polarization Insensitive Isolator

The RUIK's PM Isolator is designed to transmit positive light, while blocking the reflected light from the terminal. The PM isolator is characterized with low insertion loss, high isolation, high return loss and excellent environmental stability and reliability. It's the critical device of polarization maintaining fiber amplifiers, fiber lasers, high speed communication systems and instrumentation applications, EDFA. PM Isolator has slow axis working, fast axis blocked and both axis working can be selected.

1x2 (2x2) PM Fused fiber Coupler

RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

2000nm PM Fiber Mirror

Ruik's fiber mirror is a passive device with compace size, which is disigned to reflect the light through original route.

1550nm/ 1310nm PM Fiber Mirror

Ruik's fiber mirror is a passive device with compace size, which is disigned to reflect the light through original route.

1310nm 500mW Polarization Insensitive Isolator

The RUIK's PM Isolator is designed to transmit positive light, while blocking the reflected light from the terminal. The PM isolator is characterized with low insertion loss, high isolation, high return loss and excellent environmental stability and reliability. It's the critical device of polarization maintaining fiber amplifiers, fiber lasers, high speed communication systems and instrumentation applications, EDFA. PM Isolator has slow axis working, fast axis blocked and both axis working can be selected.

1310nm 300mW PM Isolator

The RUIK's PM Isolator is designed to transmit positive light, while blocking the reflected light from the terminal. The PM isolator is characterized with low insertion loss, high isolation, high return loss and excellent environmental stability and reliability. It's the critical device of polarization maintaining fiber amplifiers, fiber lasers, high speed communication systems and instrumentation applications, EDFA. PM Isolator has slow axis working, fast axis blocked and both axis working can be selected.

1064nm 300mW Polarization Insensitive Isolator

The RUIK's PM Isolator is designed to transmit positive light, while blocking the reflected light from the terminal. The PM isolator is characterized with low insertion loss, high isolation, high return loss and excellent environmental stability and reliability. It's the critical device of polarization maintaining fiber amplifiers, fiber lasers, high speed communication systems and instrumentation applications, EDFA. PM Isolator has slow axis working, fast axis blocked and both axis working can be selected.

780nm Polarization Maintaining Fiber Patchcord

Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.

980nm PM Fused fiber Coupler (1x2, 2x2)

RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

850nm PM Fused fiber Coupler (1x2, 2x2)

RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

PM Fiber Mirror

Ruik's fiber mirror is a passive device with compace size, which is disigned to reflect the light through original route.

808nm PM Fused fiber Coupler (1x2, 2x2)

RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

780nm PM Fused fiber Coupler (1x2, 2x2)

RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

3-port 1064nm 300mW Non-PM Circulator

The 1064nm Non-PM Fiber Circulator routes input signals from Port 1 to Port 2 and input Port 2 signals to Port 3 while blocking reflected light; The device has high isolation, low insertion loss, high extinction ratio and excellent environmental stability.

PM Faraday Rotator Mirror

Ruik's fiber mirror is a passive device with compace size, which is disigned to reflect the light through original route.

Optical Fiber Faraday Rotator

Ruik's fiber mirror is a passive device with compace size, which is disigned to reflect the light through original route.

1550nm 500mW Polarization Insensitive Isolator

The RUIK's PM Isolator is designed to transmit positive light, while blocking the reflected light from the terminal. The PM isolator is characterized with low insertion loss, high isolation, high return loss and excellent environmental stability and reliability. It's the critical device of polarization maintaining fiber amplifiers, fiber lasers, high speed communication systems and instrumentation applications, EDFA. PM Isolator has slow axis working, fast axis blocked and both axis working can be selected.

1x2 (2x2) PM Fused fiber Coupler

RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

2000nm PM Fiber Mirror

Ruik's fiber mirror is a passive device with compace size, which is disigned to reflect the light through original route.

1550nm/ 1310nm PM Fiber Mirror

Ruik's fiber mirror is a passive device with compace size, which is disigned to reflect the light through original route.

1310nm 500mW Polarization Insensitive Isolator

The RUIK's PM Isolator is designed to transmit positive light, while blocking the reflected light from the terminal. The PM isolator is characterized with low insertion loss, high isolation, high return loss and excellent environmental stability and reliability. It's the critical device of polarization maintaining fiber amplifiers, fiber lasers, high speed communication systems and instrumentation applications, EDFA. PM Isolator has slow axis working, fast axis blocked and both axis working can be selected.

1310nm 300mW PM Isolator

The RUIK's PM Isolator is designed to transmit positive light, while blocking the reflected light from the terminal. The PM isolator is characterized with low insertion loss, high isolation, high return loss and excellent environmental stability and reliability. It's the critical device of polarization maintaining fiber amplifiers, fiber lasers, high speed communication systems and instrumentation applications, EDFA. PM Isolator has slow axis working, fast axis blocked and both axis working can be selected.

1064nm 300mW Polarization Insensitive Isolator

The RUIK's PM Isolator is designed to transmit positive light, while blocking the reflected light from the terminal. The PM isolator is characterized with low insertion loss, high isolation, high return loss and excellent environmental stability and reliability. It's the critical device of polarization maintaining fiber amplifiers, fiber lasers, high speed communication systems and instrumentation applications, EDFA. PM Isolator has slow axis working, fast axis blocked and both axis working can be selected.