High Power Components
1550nm 2x2 High Power PM Filter Coupler (up to 20W)
The PM Filter Coupler is characterized with low insertion loss, high return loss, high extinction ratio and excellent environmental stability and reliability. It performs properly in FOCT, Gyro and other polarization maintaining fiber systerms.
1550nm 1x2 High Power PM Filter Coupler (up to 20W)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
1080nm High Power Tap Isolator Hybrid (TGG Based)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
1030nm High Power Isolator & Tap & WDM Hybrid (TGG Based)
Ruik's Tap & Isolator & WDM Hybrid is a device to combine the functions of coupler, isolator and WDM device
1030nm High Power Isolator & Bandpass Filter (TGG Based)
Ruik's bandpass filter device is designed to transmitt the light of narrow bandwidth, blocking the others. BPF is applied in fiber laser.
1064nm High Power Tap Isolator Hybrid (TGG Based)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
1064nm High Power Isolator & WDM Hybrid (TGG Based)
The PM Isolator WDM hybrid combines WDM and isolator into a compact package to offer cost saving solution. This device is ideal for fiber amplifier application to combine signal and pump wavelengths with very stable signal isolation.
1064nm High Power Isolator & Bandpass Filter (TGG Based)
The Bandpass Filter is a micro optics device based on environmentally stable thin film filter technology. It is widely applied to blocking the unwanted noise signals in EDFA and fiber pump laser systerms, to get the signals needed. The components are characterized with high isolation, low insertion loss, high return loss, excellent environmental stability and reliability and high power handing capability.
1064nm High Power Tap Isolator Hybrid (TGG Based)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
1064nm High Power PM Fused Coupler (up to 20W)
The Polarization Maintaining Fused Wavelength Division Multiplexer is combine or separate light at different wavelengths. It charaterized with very low insertion loss, high extinction ratio and excellent environmental stability.
1064/980nm High Power Isolator & WDM Hybrid (TGG Based)
The PM Isolator WDM hybrid combines WDM and isolator into a compact package to offer cost saving solution. This device is ideal for fiber amplifier application to combine signal and pump wavelengths with very stable signal isolation.
1064nm High Power Isolator & Bandpass Filter (TGG Based)
Ruik's Isolator & WDM Hybrid is a device to combine the functions of isolator and WDM device
1550nm 2x2 High Power PM Filter Coupler (up to 20W)
The PM Filter Coupler is characterized with low insertion loss, high return loss, high extinction ratio and excellent environmental stability and reliability. It performs properly in FOCT, Gyro and other polarization maintaining fiber systerms.
1550nm 1x2 High Power PM Filter Coupler (up to 20W)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
1080nm High Power Tap Isolator Hybrid (TGG Based)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
1030nm High Power Isolator & Tap & WDM Hybrid (TGG Based)
Ruik's Tap & Isolator & WDM Hybrid is a device to combine the functions of coupler, isolator and WDM device
1030nm High Power Isolator & Bandpass Filter (TGG Based)
Ruik's bandpass filter device is designed to transmitt the light of narrow bandwidth, blocking the others. BPF is applied in fiber laser.
1064nm High Power Tap Isolator Hybrid (TGG Based)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
1064nm High Power Isolator & WDM Hybrid (TGG Based)
The PM Isolator WDM hybrid combines WDM and isolator into a compact package to offer cost saving solution. This device is ideal for fiber amplifier application to combine signal and pump wavelengths with very stable signal isolation.
1064nm High Power Isolator & Bandpass Filter (TGG Based)
The Bandpass Filter is a micro optics device based on environmentally stable thin film filter technology. It is widely applied to blocking the unwanted noise signals in EDFA and fiber pump laser systerms, to get the signals needed. The components are characterized with high isolation, low insertion loss, high return loss, excellent environmental stability and reliability and high power handing capability.
1064nm High Power Tap Isolator Hybrid (TGG Based)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
1064nm High Power PM Fused Coupler (up to 20W)
The Polarization Maintaining Fused Wavelength Division Multiplexer is combine or separate light at different wavelengths. It charaterized with very low insertion loss, high extinction ratio and excellent environmental stability.
1064/980nm High Power Isolator & WDM Hybrid (TGG Based)
The PM Isolator WDM hybrid combines WDM and isolator into a compact package to offer cost saving solution. This device is ideal for fiber amplifier application to combine signal and pump wavelengths with very stable signal isolation.
1064nm High Power Isolator & Bandpass Filter (TGG Based)
Ruik's Isolator & WDM Hybrid is a device to combine the functions of isolator and WDM device
1550nm 2x2 High Power PM Filter Coupler (up to 20W)
The PM Filter Coupler is characterized with low insertion loss, high return loss, high extinction ratio and excellent environmental stability and reliability. It performs properly in FOCT, Gyro and other polarization maintaining fiber systerms.
关键词：
隐藏域元素占位
1550nm 1x2 High Power PM Filter Coupler (up to 20W)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
关键词：
隐藏域元素占位
1080nm High Power Tap Isolator Hybrid (TGG Based)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
关键词：
隐藏域元素占位
1064nm High Power Tap Isolator Hybrid (TGG Based)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
关键词：
隐藏域元素占位
1550nm 2x2 High Power PM Filter Coupler (up to 20W)
The PM Filter Coupler is characterized with low insertion loss, high return loss, high extinction ratio and excellent environmental stability and reliability. It performs properly in FOCT, Gyro and other polarization maintaining fiber systerms.
1550nm 1x2 High Power PM Filter Coupler (up to 20W)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
1080nm High Power Tap Isolator Hybrid (TGG Based)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
1030nm High Power Isolator & Tap & WDM Hybrid (TGG Based)
Ruik's Tap & Isolator & WDM Hybrid is a device to combine the functions of coupler, isolator and WDM device
1030nm High Power Isolator & Bandpass Filter (TGG Based)
Ruik's bandpass filter device is designed to transmitt the light of narrow bandwidth, blocking the others. BPF is applied in fiber laser.
1064nm High Power Tap Isolator Hybrid (TGG Based)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
1064nm High Power Isolator & WDM Hybrid (TGG Based)
The PM Isolator WDM hybrid combines WDM and isolator into a compact package to offer cost saving solution. This device is ideal for fiber amplifier application to combine signal and pump wavelengths with very stable signal isolation.
1064nm High Power Isolator & Bandpass Filter (TGG Based)
The Bandpass Filter is a micro optics device based on environmentally stable thin film filter technology. It is widely applied to blocking the unwanted noise signals in EDFA and fiber pump laser systerms, to get the signals needed. The components are characterized with high isolation, low insertion loss, high return loss, excellent environmental stability and reliability and high power handing capability.
1064nm High Power Tap Isolator Hybrid (TGG Based)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
1064nm High Power PM Fused Coupler (up to 20W)
The Polarization Maintaining Fused Wavelength Division Multiplexer is combine or separate light at different wavelengths. It charaterized with very low insertion loss, high extinction ratio and excellent environmental stability.
1064/980nm High Power Isolator & WDM Hybrid (TGG Based)
The PM Isolator WDM hybrid combines WDM and isolator into a compact package to offer cost saving solution. This device is ideal for fiber amplifier application to combine signal and pump wavelengths with very stable signal isolation.
1064nm High Power Isolator & Bandpass Filter (TGG Based)
Ruik's Isolator & WDM Hybrid is a device to combine the functions of isolator and WDM device
850nm 1x2 High Power PM Filter Coupler (up to 20W)
The PM Filter Coupler is characterized with low insertion loss, high return loss, high extinction ratio and excellent environmental stability and reliability. It performs properly in FOCT, Gyro and other polarization maintaining fiber systerms.
830nm PM Filter Coupler (1x2/2x2)
The PM Filter Coupler is characterized with low insertion loss, high return loss, high extinction ratio and excellent environmental stability and reliability. It performs properly in FOCT, Gyro and other polarization maintaining fiber systerms.
830nm PM Filter Coupler (1x2/2x2)
The PM Filter Coupler is characterized with low insertion loss, high return loss, high extinction ratio and excellent environmental stability and reliability. It performs properly in FOCT, Gyro and other polarization maintaining fiber systerms.
808nm PM Fused Coupler (1x3/3x3)
The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.
广东麒瑞新材料科技有限公司
Follow us
Copyright© 2023 RUIK-TECH COMMUNICATION (DONGGUAN) CO., LTD. All rights reserved SEO
Share