1.0μm Components
(2+1)x1 Pump & Signal Combiner
(N+1)×1 Multimode Pump and Signal Combiners can be used for high power fiber lasers and fiber amplifiers. These devices can be used to combine several pump lasers and couple that power with a seed signal. Manufactured using our proprietary methods, the product series includes (6+1)×1, (18+1)×1, (36+1)×1 and other reasonable configurations are available.
(1+1)x1 Pump & Signal Combiner
(N+1)×1 Multimode Pump and Signal Combiners can be used for high power fiber lasers and fiber amplifiers. These devices can be used to combine several pump lasers and couple that power with a seed signal. Manufactured using our proprietary methods, the product series includes (6+1)×1, (18+1)×1, (36+1)×1 and other reasonable configurations are available.
Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
1550nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
1480nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.
1310nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
1064nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
1030nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
980nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
850nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
The PM Fiber Circulator (Fast axis blocked) is a compact light-wave assembly that comes in two types. One type is 1x2 that routes input signals from Port 1 to Port 2 and input Port 2 signals to Port 3 while blocking reflected light; The other type si 2x2 that routes input signals from Port 1 to Port 2, input port 2 to port 3, and input port 3 to port 4, while blocking reflected light. The device has high isolation, low insertion loss, high extinction ratio and excellent environmental stability.
808nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
3-port 1550nm Polarization Insensitive Circulator
The PM Fiber Circulator (Fast axis blocked) is a compact light-wave assembly that comes in two types. One type is 1x2 that routes input signals from Port 1 to Port 2 and input Port 2 signals to Port 3 while blocking reflected light; The other type si 2x2 that routes input signals from Port 1 to Port 2, input port 2 to port 3, and input port 3 to port 4, while blocking reflected light. The device has high isolation, low insertion loss, high extinction ratio and excellent environmental stability.
1064nm PM Fused fiber Coupler (1x2, 2x2)
RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.
1030nm PM Fused fiber Coupler (1x2, 2x2)
RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.
(2+1)x1 Pump & Signal Combiner
(N+1)×1 Multimode Pump and Signal Combiners can be used for high power fiber lasers and fiber amplifiers. These devices can be used to combine several pump lasers and couple that power with a seed signal. Manufactured using our proprietary methods, the product series includes (6+1)×1, (18+1)×1, (36+1)×1 and other reasonable configurations are available.
(1+1)x1 Pump & Signal Combiner
(N+1)×1 Multimode Pump and Signal Combiners can be used for high power fiber lasers and fiber amplifiers. These devices can be used to combine several pump lasers and couple that power with a seed signal. Manufactured using our proprietary methods, the product series includes (6+1)×1, (18+1)×1, (36+1)×1 and other reasonable configurations are available.
Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
1550nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
1480nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.
1310nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
1064nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
1030nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
980nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
850nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
The PM Fiber Circulator (Fast axis blocked) is a compact light-wave assembly that comes in two types. One type is 1x2 that routes input signals from Port 1 to Port 2 and input Port 2 signals to Port 3 while blocking reflected light; The other type si 2x2 that routes input signals from Port 1 to Port 2, input port 2 to port 3, and input port 3 to port 4, while blocking reflected light. The device has high isolation, low insertion loss, high extinction ratio and excellent environmental stability.
808nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
3-port 1550nm Polarization Insensitive Circulator
The PM Fiber Circulator (Fast axis blocked) is a compact light-wave assembly that comes in two types. One type is 1x2 that routes input signals from Port 1 to Port 2 and input Port 2 signals to Port 3 while blocking reflected light; The other type si 2x2 that routes input signals from Port 1 to Port 2, input port 2 to port 3, and input port 3 to port 4, while blocking reflected light. The device has high isolation, low insertion loss, high extinction ratio and excellent environmental stability.
1064nm PM Fused fiber Coupler (1x2, 2x2)
RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.
1030nm PM Fused fiber Coupler (1x2, 2x2)
RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.
(2+1)x1 Pump & Signal Combiner
(N+1)×1 Multimode Pump and Signal Combiners can be used for high power fiber lasers and fiber amplifiers. These devices can be used to combine several pump lasers and couple that power with a seed signal. Manufactured using our proprietary methods, the product series includes (6+1)×1, (18+1)×1, (36+1)×1 and other reasonable configurations are available.
关键词：
隐藏域元素占位
(1+1)x1 Pump & Signal Combiner
(N+1)×1 Multimode Pump and Signal Combiners can be used for high power fiber lasers and fiber amplifiers. These devices can be used to combine several pump lasers and couple that power with a seed signal. Manufactured using our proprietary methods, the product series includes (6+1)×1, (18+1)×1, (36+1)×1 and other reasonable configurations are available.
关键词：
隐藏域元素占位
Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
关键词：
隐藏域元素占位
1550nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
关键词：
隐藏域元素占位
1480nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
关键词：
隐藏域元素占位
3x3 1064nm PM Fused Coupler
RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.
关键词：
隐藏域元素占位
1310nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
关键词：
隐藏域元素占位
1064nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
关键词：
隐藏域元素占位
1030nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
关键词：
隐藏域元素占位
980nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
关键词：
隐藏域元素占位
850nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
关键词：
隐藏域元素占位
1064nm 300mW PM Circulator
The PM Fiber Circulator (Fast axis blocked) is a compact light-wave assembly that comes in two types. One type is 1x2 that routes input signals from Port 1 to Port 2 and input Port 2 signals to Port 3 while blocking reflected light; The other type si 2x2 that routes input signals from Port 1 to Port 2, input port 2 to port 3, and input port 3 to port 4, while blocking reflected light. The device has high isolation, low insertion loss, high extinction ratio and excellent environmental stability.
关键词：
隐藏域元素占位
808nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
关键词：
隐藏域元素占位
3-port 1550nm Polarization Insensitive Circulator
The PM Fiber Circulator (Fast axis blocked) is a compact light-wave assembly that comes in two types. One type is 1x2 that routes input signals from Port 1 to Port 2 and input Port 2 signals to Port 3 while blocking reflected light; The other type si 2x2 that routes input signals from Port 1 to Port 2, input port 2 to port 3, and input port 3 to port 4, while blocking reflected light. The device has high isolation, low insertion loss, high extinction ratio and excellent environmental stability.
关键词：
隐藏域元素占位
1064nm PM Fused fiber Coupler (1x2, 2x2)
RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.
关键词：
隐藏域元素占位
1030nm PM Fused fiber Coupler (1x2, 2x2)
RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.
关键词：
隐藏域元素占位
(2+1)x1 Pump & Signal Combiner
(N+1)×1 Multimode Pump and Signal Combiners can be used for high power fiber lasers and fiber amplifiers. These devices can be used to combine several pump lasers and couple that power with a seed signal. Manufactured using our proprietary methods, the product series includes (6+1)×1, (18+1)×1, (36+1)×1 and other reasonable configurations are available.
(1+1)x1 Pump & Signal Combiner
(N+1)×1 Multimode Pump and Signal Combiners can be used for high power fiber lasers and fiber amplifiers. These devices can be used to combine several pump lasers and couple that power with a seed signal. Manufactured using our proprietary methods, the product series includes (6+1)×1, (18+1)×1, (36+1)×1 and other reasonable configurations are available.
Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
1550nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
1480nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.
1310nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
1064nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
1030nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
980nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
850nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
The PM Fiber Circulator (Fast axis blocked) is a compact light-wave assembly that comes in two types. One type is 1x2 that routes input signals from Port 1 to Port 2 and input Port 2 signals to Port 3 while blocking reflected light; The other type si 2x2 that routes input signals from Port 1 to Port 2, input port 2 to port 3, and input port 3 to port 4, while blocking reflected light. The device has high isolation, low insertion loss, high extinction ratio and excellent environmental stability.
808nm Polarization Maintaining Fiber Patchcord
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors.
3-port 1550nm Polarization Insensitive Circulator
The PM Fiber Circulator (Fast axis blocked) is a compact light-wave assembly that comes in two types. One type is 1x2 that routes input signals from Port 1 to Port 2 and input Port 2 signals to Port 3 while blocking reflected light; The other type si 2x2 that routes input signals from Port 1 to Port 2, input port 2 to port 3, and input port 3 to port 4, while blocking reflected light. The device has high isolation, low insertion loss, high extinction ratio and excellent environmental stability.
1064nm PM Fused fiber Coupler (1x2, 2x2)
RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.
1030nm PM Fused fiber Coupler (1x2, 2x2)
RUIK's Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.
广东麒瑞新材料科技有限公司
Follow us
Copyright© 2023 RUIK-TECH COMMUNICATION (DONGGUAN) CO., LTD. All rights reserved SEO
Share