808nm PM Fused Coupler (1x3/3x3)

The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.

808nm PM Fused Coupler (1x3/3x3)

The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.

808nm PM Fused Coupler (1x2/2x2)

The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.

808nm PM Filter Coupler (1x2/2x2)

The PM Filter Coupler is characterized with low insertion loss, high return loss, high extinction ratio and excellent environmental stability and reliability. It performs properly in FOCT, Gyro and other polarization maintaining fiber systerms.

808nm High Power PM Fused Coupler (up to 20W)

The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.

808nm 2x2 High Power PM Filter Coupler (up to 20W)

The PM Filter Coupler is characterized with low insertion loss, high return loss, high extinction ratio and excellent environmental stability and reliability. It performs properly in FOCT, Gyro and other polarization maintaining fiber systerms.

808nm 1x2 High Power PM Filter Coupler (up to 20W)

The PM Filter Coupler is characterized with low insertion loss, high return loss, high extinction ratio and excellent environmental stability and reliability. It performs properly in FOCT, Gyro and other polarization maintaining fiber systerms.

780nm High Power PM Fused Coupler (up to 20W)

Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

780nm 2x2 High Power PM Filter Coupler (up to 20W)

Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

780nm 1x2 High Power PM Filter Coupler (up to 20W)

Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

650nm/1064nm 3W Polarization Maintaining Fused WDM

The Polarization Maintaining Fused Wavelength Division Multiplexer is combine or separate light at different wavelengths. It charaterized with very low insertion loss, high extinction ratio and excellent environmental stability.

633nm PM Fused Coupler (1x2/2x2)

Fused couplers are used to split optical signals between two (or more) fibers or to combine optical signals from two (or more) fibers into one fiber. They are constructed by fusing and tapering the fibers together. This method creates a simple, rugged, compact method of splitting or combining optical signals. Typical excess losses are as low as 0.2 dB, while split ratio tolerances range from ±5% to ±0.5% at design wavelengths depending upon the splitting ratio. These devices are bidirectional and offer low backreflection and insertion losses

633nm In-line Polarizer

The In-line Polarizer is designed to pass the light with the specified polarization, blocking the others. The function is transform non-polarized light into linearly polarized light, for the high extinction ratio. It is also used to enhance the extinction ratio of the signals of precision measurement system, fiber sensor, high speed test instrumentation where the high extinction ratio prosper is required.

532nm PM Fused Coupler (1x2/2x2)

Fused couplers are used to split optical signals between two (or more) fibers or to combine optical signals from two (or more) fibers into one fiber. They are constructed by fusing and tapering the fibers together. This method creates a simple, rugged, compact method of splitting or combining optical signals. Typical excess losses are as low as 0.2 dB, while split ratio tolerances range from ±5% to ±0.5% at design wavelengths depending upon the splitting ratio. These devices are bidirectional and offer low backreflection and insertion losses

450nm 1x2 PM Fused Coupler

Fused couplers are used to split optical signals between two (or more) fibers or to combine optical signals from two (or more) fibers into one fiber. They are constructed by fusing and tapering the fibers together. This method creates a simple, rugged, compact method of splitting or combining optical signals. Typical excess losses are as low as 0.2 dB, while split ratio tolerances range from ±5% to ±0.5% at design wavelengths depending upon the splitting ratio. These devices are bidirectional and offer low backreflection and insertion losses

405nm 1x2 Single-mode Fused Coupler

Fused couplers are used to split optical signals between two (or more) fibers or to combine optical signals from two (or more) fibers into one fiber. They are constructed by fusing and tapering the fibers together. This method creates a simple, rugged, compact method of splitting or combining optical signals. Typical excess losses are as low as 0.2 dB, while split ratio tolerances range from ±5% to ±0.5% at design wavelengths depending upon the splitting ratio. These devices are bidirectional and offer low backreflection and insertion losses

808nm PM Fused Coupler (1x3/3x3)

The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.

808nm PM Fused Coupler (1x3/3x3)

The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.

808nm PM Fused Coupler (1x2/2x2)

The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.

808nm PM Filter Coupler (1x2/2x2)

The PM Filter Coupler is characterized with low insertion loss, high return loss, high extinction ratio and excellent environmental stability and reliability. It performs properly in FOCT, Gyro and other polarization maintaining fiber systerms.

808nm High Power PM Fused Coupler (up to 20W)

The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.

808nm 2x2 High Power PM Filter Coupler (up to 20W)

The PM Filter Coupler is characterized with low insertion loss, high return loss, high extinction ratio and excellent environmental stability and reliability. It performs properly in FOCT, Gyro and other polarization maintaining fiber systerms.

808nm 1x2 High Power PM Filter Coupler (up to 20W)

The PM Filter Coupler is characterized with low insertion loss, high return loss, high extinction ratio and excellent environmental stability and reliability. It performs properly in FOCT, Gyro and other polarization maintaining fiber systerms.

780nm High Power PM Fused Coupler (up to 20W)

Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

780nm 2x2 High Power PM Filter Coupler (up to 20W)

Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

780nm 1x2 High Power PM Filter Coupler (up to 20W)

Fused couplers are used to split optical signals between two fibers, or to combine optical signals from two fibers into one fiber. They are constructed by fusing and tapering two fibers together. RUIK's fused couplers are available in a range of wavelengths, fiber sizes, and splitting ratios. The fiber ends can be terminated with a variety of fiber connectors. Standard configurations are 1x2 and 2x2 couplers. N by M fused couplers, such as 1x3, or 1x4,etc., are also available on request.

650nm/1064nm 3W Polarization Maintaining Fused WDM

The Polarization Maintaining Fused Wavelength Division Multiplexer is combine or separate light at different wavelengths. It charaterized with very low insertion loss, high extinction ratio and excellent environmental stability.

633nm PM Fused Coupler (1x2/2x2)

Fused couplers are used to split optical signals between two (or more) fibers or to combine optical signals from two (or more) fibers into one fiber. They are constructed by fusing and tapering the fibers together. This method creates a simple, rugged, compact method of splitting or combining optical signals. Typical excess losses are as low as 0.2 dB, while split ratio tolerances range from ±5% to ±0.5% at design wavelengths depending upon the splitting ratio. These devices are bidirectional and offer low backreflection and insertion losses

633nm In-line Polarizer

The In-line Polarizer is designed to pass the light with the specified polarization, blocking the others. The function is transform non-polarized light into linearly polarized light, for the high extinction ratio. It is also used to enhance the extinction ratio of the signals of precision measurement system, fiber sensor, high speed test instrumentation where the high extinction ratio prosper is required.

532nm PM Fused Coupler (1x2/2x2)

Fused couplers are used to split optical signals between two (or more) fibers or to combine optical signals from two (or more) fibers into one fiber. They are constructed by fusing and tapering the fibers together. This method creates a simple, rugged, compact method of splitting or combining optical signals. Typical excess losses are as low as 0.2 dB, while split ratio tolerances range from ±5% to ±0.5% at design wavelengths depending upon the splitting ratio. These devices are bidirectional and offer low backreflection and insertion losses

450nm 1x2 PM Fused Coupler

Fused couplers are used to split optical signals between two (or more) fibers or to combine optical signals from two (or more) fibers into one fiber. They are constructed by fusing and tapering the fibers together. This method creates a simple, rugged, compact method of splitting or combining optical signals. Typical excess losses are as low as 0.2 dB, while split ratio tolerances range from ±5% to ±0.5% at design wavelengths depending upon the splitting ratio. These devices are bidirectional and offer low backreflection and insertion losses

405nm 1x2 Single-mode Fused Coupler

Fused couplers are used to split optical signals between two (or more) fibers or to combine optical signals from two (or more) fibers into one fiber. They are constructed by fusing and tapering the fibers together. This method creates a simple, rugged, compact method of splitting or combining optical signals. Typical excess losses are as low as 0.2 dB, while split ratio tolerances range from ±5% to ±0.5% at design wavelengths depending upon the splitting ratio. These devices are bidirectional and offer low backreflection and insertion losses