Products
1064nm PM Fused Coupler (1x3/3x3)
The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.
1064nm PM Fused Coupler (1x2/2x2)
The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.
1064nm PM Filter Coupler (1x2/2x2)
Ruik's Polarization Maintaining Filter Coupler is one type of passive components, which divides the light into any proportions
1064nm Polarization Maintaining Fiber Coupler Module
The Polarization Maintainiing Coupler Module has low insertion loss and polarization dependent loss, miniature size, wide operating wavelength and temperature range, super reliability and excellent channel uniformity.
The In-line Polarizer is designed to pass the light with the specified polarization, blocking the others. The function is transform non-polarized light into linearly polarized light, for the high extinction ratio. It is also used to enhance the extinction ratio of the signals of precision measurement system, fiber sensor, high speed test instrumentation where the high extinction ratio prosper is required.
1064nm In-line Faraday Rotator (TGG Based)
Faraday rotators change the polarization state of light traveling through it.
1064nm High Power Tap Isolator Hybrid (TGG Based)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
1064nm High Power PM Fused Coupler (up to 20W)
The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.
1064nm High Power Isolator & WDM Hybrid (TGG Based)
The PM Isolator WDM hybrid combines WDM and isolator into a compact package to offer cost saving solution. This device is ideal for fiber amplifier application to combine signal and pump wavelengths with very stable signal isolation.
1064nm High Power Isolator & Bandpass Filter (TGG Based)
The Bandpass Filter is a micro optics device based on environmentally stable thin film filter technology. It is widely applied to blocking the unwanted noise signals in EDFA and fiber pump laser systerms, to get the signals needed. The components are characterized with high isolation, low insertion loss, high return loss, excellent environmental stability and reliability and high power handing capability.
1064nm/1550nm 3W Polarization Maintaining Fused WDM
The Polarization Maintaining Fused Wavelength Division Multiplexer is combine or separate light at different wavelengths. It charaterized with very low insertion loss, high extinction ratio and excellent environmental stability.
1064nm Polarization Maintaining Fiber Mirror
The Polarization Maintaining Faraday Mirror is manufactured mainly for sensing system, such as FOCT, Hydrophone, Gyro. The Faraday Mirro has such charateristics: compact size, high extinction ratio, high stability, etc.
1064nm Polarization Maintaining Faraday Rotator Mirror
The Polarization Maintaining Faraday Mirror is manufactured mainly for sensing system, such as FOCT, Hydrophone, Gyro. The Faraday Mirro has such charateristics: compact size, high extinction ratio, high stability, etc.
1064nm Polarization Beam Splitter/Combiner
The Polarization Beam Splitter is a device with compact size, which combines two polarization signals into one output fiber. Characterized with excellent features of low insertion loss, high extinction ratio & return loss, high reliability and stability.
1064nm PM Manual Variable Optical Attenuator
The Polarization Manual Variable Optical Attenuator is designed to reduce the output optical power and get the power suitable. It is characterized with low insertion loss, high extinction ratio and high return loss.
1064nm PM Fused Coupler (1x3/3x3)
The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.
1064nm PM Fused Coupler (1x2/2x2)
The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.
1064nm PM Filter Coupler (1x2/2x2)
Ruik's Polarization Maintaining Filter Coupler is one type of passive components, which divides the light into any proportions
1064nm Polarization Maintaining Fiber Coupler Module
The Polarization Maintainiing Coupler Module has low insertion loss and polarization dependent loss, miniature size, wide operating wavelength and temperature range, super reliability and excellent channel uniformity.
The In-line Polarizer is designed to pass the light with the specified polarization, blocking the others. The function is transform non-polarized light into linearly polarized light, for the high extinction ratio. It is also used to enhance the extinction ratio of the signals of precision measurement system, fiber sensor, high speed test instrumentation where the high extinction ratio prosper is required.
1064nm In-line Faraday Rotator (TGG Based)
Faraday rotators change the polarization state of light traveling through it.
1064nm High Power Tap Isolator Hybrid (TGG Based)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
1064nm High Power PM Fused Coupler (up to 20W)
The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.
1064nm High Power Isolator & WDM Hybrid (TGG Based)
The PM Isolator WDM hybrid combines WDM and isolator into a compact package to offer cost saving solution. This device is ideal for fiber amplifier application to combine signal and pump wavelengths with very stable signal isolation.
1064nm High Power Isolator & Bandpass Filter (TGG Based)
The Bandpass Filter is a micro optics device based on environmentally stable thin film filter technology. It is widely applied to blocking the unwanted noise signals in EDFA and fiber pump laser systerms, to get the signals needed. The components are characterized with high isolation, low insertion loss, high return loss, excellent environmental stability and reliability and high power handing capability.
1064nm/1550nm 3W Polarization Maintaining Fused WDM
The Polarization Maintaining Fused Wavelength Division Multiplexer is combine or separate light at different wavelengths. It charaterized with very low insertion loss, high extinction ratio and excellent environmental stability.
1064nm Polarization Maintaining Fiber Mirror
The Polarization Maintaining Faraday Mirror is manufactured mainly for sensing system, such as FOCT, Hydrophone, Gyro. The Faraday Mirro has such charateristics: compact size, high extinction ratio, high stability, etc.
1064nm Polarization Maintaining Faraday Rotator Mirror
The Polarization Maintaining Faraday Mirror is manufactured mainly for sensing system, such as FOCT, Hydrophone, Gyro. The Faraday Mirro has such charateristics: compact size, high extinction ratio, high stability, etc.
1064nm Polarization Beam Splitter/Combiner
The Polarization Beam Splitter is a device with compact size, which combines two polarization signals into one output fiber. Characterized with excellent features of low insertion loss, high extinction ratio & return loss, high reliability and stability.
1064nm PM Manual Variable Optical Attenuator
The Polarization Manual Variable Optical Attenuator is designed to reduce the output optical power and get the power suitable. It is characterized with low insertion loss, high extinction ratio and high return loss.
1064nm Polarization Maintaining Fiber Coupler Module
The Polarization Maintainiing Coupler Module has low insertion loss and polarization dependent loss, miniature size, wide operating wavelength and temperature range, super reliability and excellent channel uniformity.
关键词：
隐藏域元素占位
1064nm In-line Polarizer
The In-line Polarizer is designed to pass the light with the specified polarization, blocking the others. The function is transform non-polarized light into linearly polarized light, for the high extinction ratio. It is also used to enhance the extinction ratio of the signals of precision measurement system, fiber sensor, high speed test instrumentation where the high extinction ratio prosper is required.
关键词：
隐藏域元素占位
1064nm High Power Tap Isolator Hybrid (TGG Based)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
关键词：
隐藏域元素占位
1064nm High Power PM Fused Coupler (up to 20W)
The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.
关键词：
隐藏域元素占位
1064nm High Power Isolator & WDM Hybrid (TGG Based)
The PM Isolator WDM hybrid combines WDM and isolator into a compact package to offer cost saving solution. This device is ideal for fiber amplifier application to combine signal and pump wavelengths with very stable signal isolation.
关键词：
隐藏域元素占位
1064nm High Power Isolator & Bandpass Filter (TGG Based)
The Bandpass Filter is a micro optics device based on environmentally stable thin film filter technology. It is widely applied to blocking the unwanted noise signals in EDFA and fiber pump laser systerms, to get the signals needed. The components are characterized with high isolation, low insertion loss, high return loss, excellent environmental stability and reliability and high power handing capability.
关键词：
隐藏域元素占位
1064nm/1550nm 3W Polarization Maintaining Fused WDM
The Polarization Maintaining Fused Wavelength Division Multiplexer is combine or separate light at different wavelengths. It charaterized with very low insertion loss, high extinction ratio and excellent environmental stability.
关键词：
隐藏域元素占位
1064nm Polarization Maintaining Fiber Mirror
The Polarization Maintaining Faraday Mirror is manufactured mainly for sensing system, such as FOCT, Hydrophone, Gyro. The Faraday Mirro has such charateristics: compact size, high extinction ratio, high stability, etc.
关键词：
隐藏域元素占位
1064nm Polarization Maintaining Faraday Rotator Mirror
The Polarization Maintaining Faraday Mirror is manufactured mainly for sensing system, such as FOCT, Hydrophone, Gyro. The Faraday Mirro has such charateristics: compact size, high extinction ratio, high stability, etc.
关键词：
隐藏域元素占位
1064nm Polarization Beam Splitter/Combiner
The Polarization Beam Splitter is a device with compact size, which combines two polarization signals into one output fiber. Characterized with excellent features of low insertion loss, high extinction ratio & return loss, high reliability and stability.
关键词：
隐藏域元素占位
1064nm PM Manual Variable Optical Attenuator
The Polarization Manual Variable Optical Attenuator is designed to reduce the output optical power and get the power suitable. It is characterized with low insertion loss, high extinction ratio and high return loss.
关键词：
隐藏域元素占位
1064nm PM Fused Coupler (1x3/3x3)
The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.
1064nm PM Fused Coupler (1x2/2x2)
The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.
1064nm PM Filter Coupler (1x2/2x2)
Ruik's Polarization Maintaining Filter Coupler is one type of passive components, which divides the light into any proportions
1064nm Polarization Maintaining Fiber Coupler Module
The Polarization Maintainiing Coupler Module has low insertion loss and polarization dependent loss, miniature size, wide operating wavelength and temperature range, super reliability and excellent channel uniformity.
The In-line Polarizer is designed to pass the light with the specified polarization, blocking the others. The function is transform non-polarized light into linearly polarized light, for the high extinction ratio. It is also used to enhance the extinction ratio of the signals of precision measurement system, fiber sensor, high speed test instrumentation where the high extinction ratio prosper is required.
1064nm In-line Faraday Rotator (TGG Based)
Faraday rotators change the polarization state of light traveling through it.
1064nm High Power Tap Isolator Hybrid (TGG Based)
The Polarization Maintaining Tap Isolator combines a tap coupler and isolator into a single compact package. It is characterized with high extinction ratio, low insertion loss, high isolation and a very stable tap-coupling ratio. It is widely used in fiber amplifiers, fiber lasers and fiber sensors.
1064nm High Power PM Fused Coupler (up to 20W)
The Fused Type PM Fiber Coupler is characterized by low insertion loss, high power signal processing and stable & reliable environment. Suitable for Fiber Gyroscope, Power Monitor and Optical Sensor.
1064nm High Power Isolator & WDM Hybrid (TGG Based)
The PM Isolator WDM hybrid combines WDM and isolator into a compact package to offer cost saving solution. This device is ideal for fiber amplifier application to combine signal and pump wavelengths with very stable signal isolation.
1064nm High Power Isolator & Bandpass Filter (TGG Based)
The Bandpass Filter is a micro optics device based on environmentally stable thin film filter technology. It is widely applied to blocking the unwanted noise signals in EDFA and fiber pump laser systerms, to get the signals needed. The components are characterized with high isolation, low insertion loss, high return loss, excellent environmental stability and reliability and high power handing capability.
1064nm/1550nm 3W Polarization Maintaining Fused WDM
The Polarization Maintaining Fused Wavelength Division Multiplexer is combine or separate light at different wavelengths. It charaterized with very low insertion loss, high extinction ratio and excellent environmental stability.
1064nm Polarization Maintaining Fiber Mirror
The Polarization Maintaining Faraday Mirror is manufactured mainly for sensing system, such as FOCT, Hydrophone, Gyro. The Faraday Mirro has such charateristics: compact size, high extinction ratio, high stability, etc.
1064nm Polarization Maintaining Faraday Rotator Mirror
The Polarization Maintaining Faraday Mirror is manufactured mainly for sensing system, such as FOCT, Hydrophone, Gyro. The Faraday Mirro has such charateristics: compact size, high extinction ratio, high stability, etc.
1064nm Polarization Beam Splitter/Combiner
The Polarization Beam Splitter is a device with compact size, which combines two polarization signals into one output fiber. Characterized with excellent features of low insertion loss, high extinction ratio & return loss, high reliability and stability.
1064nm PM Manual Variable Optical Attenuator
The Polarization Manual Variable Optical Attenuator is designed to reduce the output optical power and get the power suitable. It is characterized with low insertion loss, high extinction ratio and high return loss.
广东麒瑞新材料科技有限公司
Follow us
Copyright© 2023 RUIK-TECH COMMUNICATION (DONGGUAN) CO., LTD. All rights reserved SEO
Share